ウェットパートペーパーフォーミングフェルト ペーパーメーキングファブリック グラナイトプレスボトムフェルト
円筒型モールドクラフト/ライナー/フルーティング紙機ウェットパート紙形成フェルト/グラナイトプレスボトムフェルト
ペーパーフェルトは、製紙業界で紙の形成、脱水、ウェットプレスでの湿った紙の搬送に使用される生地です。加工方法は、まず合成繊維で薄い基布を作り、次に合成繊維と少量のウールを混合した繊維ウェブを置き、ニードルパンチ、化学処理、樹脂仕上げ、熱セットによって作られます。製品には、良好な脱水性、平滑性、耐摩耗性、寸法安定性、耐薬品性、抗菌性、耐熱性、耐加水分解性などが要求されます。
紙形成フェルトの仕様
| 1 | 原材料 | 廃カートン;廃ボール紙 |
| 2 | 紙坪量 | 90-200g/m2 |
| 3 | 機械タイプ | 円筒型モールド |
| 4 | 機械速度 | 150-160m/min |
| 5 | フェルト坪量 | 800-1000g/m2 |
| 5 | ボトムワイヤー | 単層 |
グラナイトプレスボトムフェルトの仕様
| 1 | 原材料 | 廃カートン;廃ボール紙 |
| 2 | 紙坪量 | 90-200g/m2 |
| 3 | 機械タイプ | 円筒型モールド |
| 4 | 機械速度 | 150-160m/min |
| 5 | フェルト坪量 | 1000-1300g/m2 |
| 5 | ボトムワイヤー | 二層 |
製紙フェルトの選択は、製造される紙の種類、紙の坪量と表面改質要件、製紙機械の種類、フェルトが使用される環境条件、および既存のカーペット洗浄・浄化装置によって異なります。紙の表面改質要件がより厳しい場合、フェルトボトムネットの縦糸と横糸はより細く、構造設計は滑らかな表面を必要とします。高速・広幅の製紙機械には、フェルトの良好な強度と安定性が必要であり、溝、ブラインドホール、真空プレスロールには、より強いフェルトが必要です。プレス荷重が高く、プレスロールの表面が硬い場合、フェルトの機械的特性はより高くなります。高圧水洗を備えたブランケットには、良好な起毛堅牢度が必要です





ウェットパート紙機械フェルト
,グラナイトプレスボトム紙機械フェルト
,紙成形紙製造ファブリック
-
廃紙パルプ洗浄用低粘度スラグ除去機
Stainless steel low consistency waste paper pulp cleaning equipment to remove the light impurities The combined high-efficiency light and heavy impurity slag remover is an important pulp purification and slag remover in the paper industry. The shape of the slag remover is a cone with a cone angle of ... -
製紙パルプ洗浄用インワードフロー/インフロー圧力スクリーンステンレス鋼
Stainless steel inward flow / inflow pressure screen for the paper pulp cleaning The outer rotor inward flow / inflow pressure screen is an advanced pulp screening equipment, which can be used for pulp screening in the middle of pulping system and for pulp selection in front of the paper machine. ... -
製紙産業における高スクリーニング効率の穴あきバスケット圧力スクリーン
3. Hole type basket pressure screen used in the coarse pulp filtering ZSL pressure screen adopts the upflow structure design of bottom slurry feeding, bottom heavy slag discharge and top light slag discharge, which effectively solves the above problems. The light impurities and the air in the slurry ...